HP-P11 Vertical Autoclave with Dryer
Price, lead time and documents for your market are confirmed in the quotation.
Key takeaways
- HP-P11 is the first of four Dry-version vertical autoclaves, HP-P11 to HP-P14; the Dry version adds a drying function to the vertical format.
- A drying stage matters for wrapped instruments, linen and glassware that are stored after sterilization.
- The drying method and autoclave dry cycle time are confirmed on the HP-P11 data sheet.
HP-P11 is the first model in the Dry version of our vertical line: an autoclave with dryer function in an upright, top-loading chamber. It suits clinics and labs whose loads must come out dry enough to store.
Compared with the Normal version (HP-P07 to HP-P10), the Dry version adds a drying function; both are shown with the same product photo. The Drying Internal Circulation version (HP-P16 to HP-P18) carries a different drying designation, so compare the two data sheets if drying speed matters.
Key Features
- Vertical autoclave with drying function, top loading
- Dry version, model HP-P11
- Drying stage after sterilization for loads that are stored
- Data sheet with drying method and cycle times per quotation
Applications
Loads that benefit from an autoclave machine with dryer:
- Wrapped instrument packs and drums for storage
- Dressings, gauze and linen
- Laboratory glassware needed dry for immediate use
How to specify when requesting a quote
- Load types and whether they are wrapped
- Required dry cycle time or turnaround per load
- Cycles per day
- Voltage, frequency and plug type
- Destination country and documents required
Send these details with your inquiry and we will reply with the HP-P11 data sheet and a quotation.
Specifications
| Model | HP-P11 |
|---|---|
| Format | Vertical |
| Sterilization method | Pressure steam (autoclave) |
| Version | Dry |
| Drying function | Yes |
Documents
Certificates, declarations of conformity and test reports for HP-P11 and your destination market are provided with the quotation. Tell us the country of installation and whether the unit is for medical, dental or laboratory use, and we will prepare the matching document package.
The HP-P11 technical data sheet (chamber volume, pressure and temperature ratings, power supply, dimensions and weights) is confirmed with your quote.
Frequently asked questions
+What is the autoclave dry cycle time on HP-P11?
Drying time depends on load type, wrapping and quantity as well as the machine's drying method. We confirm the HP-P11 drying method and time settings on its data sheet. As a rule, dense wrapped packs need longer drying than unwrapped glassware.
+Why are instruments still wet after an autoclave cycle?
Common causes are overloading, packs placed too tightly, the wrong wrapping material, too much water in the chamber, opening the lid too soon, or a skipped or shortened drying stage. Wet packs should not be stored as sterile because moisture can draw in microorganisms.
+Is an autoclave the same as dry heat sterilization?
No. An autoclave sterilizes with moist heat, pressurized steam, typically at 121 °C or 134 °C. Dry heat sterilizers use hot air at around 160 to 170 °C for longer times. The drying function on HP-P11 only removes moisture after the steam cycle; it is not a dry heat sterilizer.
+What is an autoclave drying cycle?
It is the stage after sterilization and exhaust in which heat, and on some models vacuum or air flow, removes condensate from the load and wrapping. It lets packs come out dry so they can be stored. Its length is set per program or by the operator.