HP-P18 Vertical Autoclave with Drying Function, Internal Circulation
Price, lead time and documents for your market are confirmed in the quotation.
Key takeaways
- HP-P18 is the third and last Drying Internal Circulation vertical autoclave, HP-P16 to HP-P18.
- Vertical autoclave capacity should be sized to your largest routine load plus space for steam and drying to work.
- Chamber volume, drying settings and power data are confirmed on the HP-P18 data sheet.
HP-P18 is the third and last model in the Drying Internal Circulation version of our vertical line, an autoclave with drying function and a top-loading chamber. Choosing the right vertical autoclave capacity matters more on drying models, because overloading slows drying as well as sterilization.
HP-P18 closes the Drying Internal Circulation range after HP-P17. Buyers who also need vacuum air removal for porous packs should compare the Pulse-Vacuum version, HP-P19 to HP-P22, which is shown in the same product photo.
Key Features
- Vertical autoclave machine with drying function
- Drying Internal Circulation version, model HP-P18, the last in its range
- Top loading for baskets and drums
- Chamber volume and drying settings on the data sheet
Applications
Typical users of a vertical sterilizer with drying function:
- Hospital wards and maternity units with daily pack loads
- Clinics consolidating several small sterilizers into one
- Labs drying glassware in bulk
How to specify when requesting a quote
- Largest routine load: number of packs, drums or baskets
- Cycles per day
- Required dryness for storage
- Voltage, frequency and plug type
- Destination country and documents
Send these details with your inquiry and we will reply with the HP-P18 data sheet and a quotation.
Specifications
| Model | HP-P18 |
|---|---|
| Format | Vertical |
| Sterilization method | Pressure steam (autoclave) |
| Version | Drying Internal Circulation |
| Drying function | Yes, internal circulation |
Documents
Certificates, declarations of conformity and test reports for HP-P18 and your destination market are provided with the quotation. Tell us the country of installation and whether the unit is for medical, dental or laboratory use, and we will prepare the matching document package.
The HP-P18 technical data sheet (chamber volume, pressure and temperature ratings, power supply, dimensions and weights) is confirmed with your quote.
Frequently asked questions
+What vertical autoclave capacity do I need?
List the packs, drums or baskets in your largest routine load, keep space around them for steam and drying, and check how many cycles you can run per day. Compare the result with the HP-P18 chamber volume on its data sheet, and with HP-P16 and HP-P17.
+Why do wrapped loads need an autoclave drying stage?
It removes condensate after the steam phase so wrapped loads come out dry. Dry packs can be stored; damp packs can draw microorganisms through the wrapping and should be reprocessed.
+Why is my autoclave not drying?
Check for overloading, blocked vents or drains, the wrong wrapping, too much water and a drying stage cut short. Also check the lid gasket and the heater. If loads are still wet with correct loading, contact the supplier with the cycle details.
+Should I choose a drying model or a pulse vacuum model?
If your loads are wrapped but not porous or hollow, a drying model may be enough. If you process textiles, porous packs or hollow instruments, choose a pulse vacuum model such as HP-P19, because air removal comes first.