ZNB-XB-Y1000 Single-Channel Volumetric Infusion Pump
Price, lead time and documents for your market are confirmed in the quotation.
Key takeaways
- ZNB-XB-Y1000 is a single-channel volumetric infusion pump for rate-controlled IV delivery on one line.
- It is used with standard infusion sets; flow-rate range, accuracy, battery and alarm list are confirmed on the model datasheet.
- The dual-channel ZNB-XB-Y1200 and our syringe pumps can be quoted in the same order.
An infusion pump delivers IV fluids and medication at a set rate and volume, replacing drip counting on a gravity line. The ZNB-XB-Y1000 is the single-channel volumetric infusion pump in the HOPE INTERNATIONAL patient-care range, for hospitals, clinics and medical equipment distributors.
Key Features
- Single channel: one infusion line per pump.
- Volumetric design, used with standard infusion sets rather than syringes.
- Front display and keypad with a carry handle on top, as shown in the catalog photo.
- The datasheet sent with the quotation covers flow-rate range, accuracy, battery runtime and the alarm list.
Applications
- General wards and surgical recovery.
- Emergency departments and ICU beds where one line needs rate control.
- District hospitals and clinics replacing gravity drips for critical infusions.
How to specify when requesting a quote
- Quantity, destination country, mains voltage and plug type.
- The infusion sets you use, so compatibility can be checked.
- Features your tender lists, such as drip sensor, drug library, battery runtime or nurse-call output.
- Whether you also need the dual-channel Y1200 or syringe pumps.
- Required documents, installation and training needs.
Specifications
| Model | ZNB-XB-Y1000 |
|---|---|
| Pump type | Volumetric infusion pump |
| Channels | 1 (single channel) |
| Infusion set compatibility | Standard infusion sets |
| Housing (catalog photo) | Front display and keypad, carry handle on top |
Documents
Certificates, declarations of conformity and test reports for the specific model and destination market are provided with the quotation.
For tenders, list the documents your hospital or ministry requires, such as user manual, service manual and test reports, and we confirm availability for the ZNB-XB-Y1000 with the quotation.
Frequently asked questions
+What is a volumetric infusion pump?
A volumetric pump controls the volume of fluid delivered per hour through an infusion set, usually set in mL/h. It handles larger volumes than a syringe pump, such as fluids, antibiotics and parenteral nutrition, and is programmed by rate and volume to be infused.
+What is the difference between an infusion pump and a syringe pump?
A volumetric infusion pump draws from a bag or bottle through an infusion set and suits larger volumes. A syringe pump pushes the plunger of a syringe and suits small volumes at low, precise rates, such as sedation or neonatal infusions. Many wards use both types.
+How does an infusion pump work?
Most volumetric pumps use a peristaltic mechanism that presses the infusion set tubing in sequence to move a measured volume. Sensors watch for blockage and air in the line, and the pump alarms and stops when a fault is detected. The mechanism and sensors of the ZNB-XB-Y1000 are described on its datasheet.
+What alarms does an infusion pump have?
Common infusion pump alarms include occlusion, air in line, infusion complete or near end, low battery, door open and pump idle. The alarm list of the ZNB-XB-Y1000 is part of the datasheet sent with the quotation.