HP-Q01 Wall-Mounted Dental Microscope
Price, lead time and documents for your market are confirmed in the quotation.
Key takeaways
- HP-Q01 is a dental operating microscope on a wall-mounted base with a two-section articulated arm, so no stand or casters sit on the operatory floor.
- It is one of four HP-Q dental microscope configurations: wall (HP-Q01), table (HP-Q02), floor stand (HP-Q03) and camera system (HP-Q04).
- Magnification steps, working distance and illumination are listed on the HP-Q01 specification sheet sent with the quotation.
The HP-Q01 is a wall-mounted dental microscope for operatories where floor space around the chair is limited. The microscope head hangs from a wall base on a two-section articulated arm, so the stand never competes with the assistant's stool, the delivery unit or the cabinets.
Key Features
- Wall-mounted base with a two-section swing arm (as pictured), leaving the floor clear for cleaning and chair movement.
- Binocular viewing head on a multi-joint suspension for positioning over either arch.
- One of four mounts in the HP-Q range: wall (HP-Q01), table (HP-Q02), floor stand (HP-Q03) and camera system (HP-Q04), so each room can get the mount that fits it.
- Optical data, including magnification steps, objective working distance, eyepieces and light source, is supplied on the model specification sheet.
Applications
Dental operating microscopes are used for root canal location and treatment, cracked-tooth diagnosis, minimally invasive restorations, periodontal and implant work, and patient education. A wall mount suits single-chair rooms, fixed operatories and new clinic fit-outs where the wall can be prepared in advance.
How to specify when requesting a quote
- Wall construction (concrete, brick or stud) and the distance from the wall to the chair headrest.
- Magnification range and working distance your clinicians need.
- Whether you need a camera adapter or recording now or later.
- Mains voltage, plug type, quantity and delivery port.
Specifications
| Model | HP-Q01 |
|---|---|
| Product type | Microscope |
| Stand / mounting | Wall-mounted arm (as pictured) |
| Viewing head | Binocular |
Documents
Certificates, declarations of conformity and test reports for the specific model and destination market are provided with the quotation.
Tell us your destination country and the documents your importer, registration or tender requires, for example the specification sheet, operator manual, electrical safety test report or declaration of conformity. We confirm which documents are available for HP-Q01 before you order.
Frequently asked questions
+What is a dental operating microscope?
A dental operating microscope is a binocular microscope with its own light source, carried on an arm so the dentist can work at magnification with both hands free. It is used mainly in endodontics and in restorative and periodontal work where fine detail matters.
+Dental loupes vs microscope: which should a clinic buy?
Loupes are worn by the clinician and give fixed, lower magnification at low cost. A microscope gives higher, adjustable magnification, light along the line of sight and a more upright working posture, and it can be fitted for imaging, but it costs more and needs a mounting position. Many practices use loupes for general work and a microscope for endodontic and complex cases.
+How is a wall-mounted dental microscope installed?
The base is fixed to a load-bearing wall at a height and distance set by the chair position and the reach of the arm. Send your wall type and room layout with the enquiry; installation requirements and the mounting hardware are confirmed with the quotation.
+Can a wall-mounted dental microscope be moved to another room?
Not easily. The base is fixed to the wall, so the microscope stays with one operatory. If one microscope has to serve several rooms, a mobile floor stand such as the HP-Q03 is the better fit.